sensor solutions /// model 4020 & 4030 rev b 9/2015 page 1 model 4020 & 4030 accelerometer specifications ? dc response, silicon mems ? dual & triaxial output options ? low cost, great value ? 2g & 6g measurement range ? rugged construction the model 4020 & 4030 are low noise, signal conditioned dc accelerometers packaged in a durable molded housing. the accelerometers are offered in 2g & 6g ranges with a nominal 0-200hz bandwidth. the model 4020 is a dual axis configuration (x&y axes) while model 4030 is a triaxial configuration. the capacitive silicon mems sensing element offers high resolution and long term stability for critical measurement applications. features ? 5- 30 vdc excitation voltage ? environmentally sealed ? low pass filtered output ? capacitive silicon mems element ? integral #24 awg cable ? self-test enabled applications ? low frequency vibration monitoring ? tilt & inclination measurement ? motion measurements ? structural monitoring dimensions
model 4020 & 4030 accelerometer sensor solutions /// model 4020 & 4030 rev b 9/2015 page 2 performance specifications all values are typical at +24c, 10hz and 5vdc excitation unles s otherwise stated. measurement specialties reserves the right to update and change these specifications without notice. parameters dynamic notes range (g) 2 6 sensitivity (mv/g) 1000 333 10% frequency response (hz) 0- 200 0- 200 5% non-linearity (%fso) 1 1 transverse sensitivity (%) <3 <3 shock limit (g) 2000 2000 residual noise (v rms) 600 240 passband residual noise (g/hz rms) 50 42 self test output change (mv) x = +210 90 x = +70 30 ground st lead y = -210 90 y = -70 30 z = -340 190 z = -110 65 electrical zero acceleration output (v) 2.5 0.1 excitation voltage (vdc) 5 to 30 excitation current (ma) 4 full scale output voltage (vdc) 2 ground isolation isolated from mounting surface environmental thermal zero shift (%fso) 4 -40 to +85c thermal sensitivity shift (%) 5 -40 to +85c operating temperature (c) -40 to 85 humidity epoxy sealed, ip65 physical housing material nylon 6-6, 30% gf, brass inserts at mounting holes weight (grams) 50 mounting 2x ? or m6 screws mounting torque 18 lb-in (2.0 n- m) optional accessories: 121 3-channel precision low noise dc amplifier the information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. furthermore, this information does not convey to the purchaser of such devices any li cense under the patent rights to the manufacturer. measurement speci alties, inc. reserves the right to make changes without further notice to any product herein. meas urement specialties, inc. makes no warranty, representation or guarante e regarding the suitability of its product for any particular purpose, nor does measurement sp ecialties, inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequ ential or incidental damages. typical parameters can and do vary in different applications. all operating parameters must be validated for each customer application by customers technical e xperts. measurement specialties, inc. does not convey any license under its patent rights nor the rights of others.
model 4020 & 4030 accelerometer sensor solutions /// model 4020 & 4030 rev b 9/2015 page 3 ordering info part numbering model number+range+cable length 40xx- ggg - ccc l l l____cable length (120 is 120 inches) l l______ __ range (002 is 2 g) l___________dual or triaxial configuration (4020 ; dual axis, 4030; triaxial) example: 4030-002- 120 model 4030 (triaxial) , 2g range , 120 inch cable length te.com/sensorsolutions measurement specialties, inc., a te connectivity company. measurement specialties, te connectivity, te connectivity (logo) and ev ery connection counts are trademarks. all other logos, products and/ or company names referred to herein might be trademarks of their respective owners. the information given herein, including drawings, illustrations an d schematics which are intended for illustration purposes only, is believe d to be reliable. however, te connectivity makes no warranties as to its accuracy or completeness and disclaims a ny liability in connection with its use. te connectivitys obligation s shall only be as set forth in te connectivitys st andard terms and conditions of sale for this product and in no case will t e connectivity be liable for any incidental, indirect or consequ ential damages arising out of the sale, resale, use or misuse of the product. users of te connectivity products should make their own evalua tion to determine the suitability of each such product for the specific ap plication. ? 2015 te connectivity ltd. family of companies all rights reserved. north america measurement specialties, inc., a te connectivity company 1000 lucas way hampton, va 23666 sales and customer service tel: +1-800- 745 -8008 or +1 -757-766-1500 fax: +1-757-766-4297 t&m@meas-spec.com europe meas france sas a te connectivity company 26 rue des dames f78340 les clayes-sous-bois france sales and customer service tel: +33 (0) 1 79 33 00 fax: +33(0)1 34 81 03 59 t&m@meas-spec.com asia measurement specialties (china), ltd., a te connectivity company no. 26 langshan road shenzhen high-tech park (north) nanshan district, shenzhen 518057 china sales and customer service tel: +86 755 3330 5088 fax: +86 755 3330 5099 t&m@meas-spec.com
|
